Clay Machine - Introduction to Mastering Soil Technology

When using two or more types of raw materials to make tiles in a clay machine, uneven mixing can cause cracks in the product. Because the drying and roasting shrinkage of the two raw materials cannot be the same, it is easy to form internal stress, and cracks are inevitable after drying and roasting - look at these laborious and inefficient labor.

The lack of matching clay machine equipment is also the reason for product cracks:

1. Equipment defects: Due to the unreasonable design of certain parameters of the clay tile machine itself, product cracks may occur, such as uneven mixing, insufficient mixing strength, and short mixing time caused by improper design or production of the mixer. According to the experimental test results, the air content in the clay before molding by the clay machine is generally 10% -12%. During molding, a vacuum pump should be used to extract this air as much as possible. Because it is impossible to achieve absolute vacuum, there is always a portion of air trapped in the bricks.

Of course, the smaller the particle size of the mud, the larger its specific surface area, the stronger its ability to combine with water, and the higher the moisture content of the molding, which will increase the difficulty of drying

Prevention and control measures: Reasonably select vacuum pumps, strengthen management, prevent air leakage from clay machines, and ensure that the vacuum degree is above 85%.

The characteristics of clay machine: vacuum tile machine, green tube tile machine, gray green tile machine equipment, small green tile machine vacuum tile machine equipment ZJ-160H vacuum tile machine has small volume, light weight, convenient movement and transportation, and occupies small space.

One machine is versatile and has diverse functions. By selecting and using the corresponding machine head, different varieties and specifications of bricks and tiles can be produced. Enable users to flexibly operate multiple products according to market demand, avoiding market risks due to a single product.